Ordenar por:   Filtrar resultados: 
Cód. Web Referencia Descripcion Familia P.V.P.
10629 25240 Detector de Presencia KNX/KLR 300 , montaje en pared, REGULACION CONSTANTE DE LUZ. DETECTORES

·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

·       4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

TECHNICAL DATA

Nominal voltage: 24 V DC (21–30 V DC)

Power consumption: 0.4 W

Detection angle: 180°

Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height

Installation height: 1–3 m

PIR Sensors: 3 pyro sensors for extensive detection

Sensitivity: Adjustable in 10 steps via ETS

Settings: All settings can be parameterized via ETS3

Illuminance measurement: Light sensor with optical filter and linear output

Illuminance value: Lux Value export via bus

KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol

Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE

Temperature range: -20 to +40 °C

Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)

SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)

SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions

10629
25240 DETECTOR DE PRESENCIA KNX/KLR 300 , MONTAJE EN PARED, REGULACION CONSTANTE DE LUZ. DETECTORES
10630 25241 Detector presencia 300 KNX/KLR IP55, montaje en pared, REGULACION CONSTANTE DE LUZ. DETECTORES

·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

·       4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

TECHNICAL DATA

Nominal voltage: 24 V DC (21–30 V DC)

Power consumption: 0.4 W

Detection angle: 180°

Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height

Installation height: 1–3 m

PIR Sensors: 3 pyro sensors for extensive detection

Sensitivity: Adjustable in 10 steps via ETS

Settings: All settings can be parameterized via ETS3

Illuminance measurement: Light sensor with optical filter and linear output

Illuminance value: Lux Value export via bus

KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol

Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE

Temperature range: -20 to +40 °C

Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)

SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)

SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions)

10630
25241 DETECTOR PRESENCIA 300 KNX/KLR IP55, MONTAJE EN PARED, REGULACION CONSTANTE DE LUZ. DETECTORES
10633 25242 Detector presencia 300 KNX/KLR IP55, montaje en pared (superficie), REGULACION CONSTANTE DE LUZ. DETECTORES

·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

·       4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

TECHNICAL DATA

Nominal voltage: 24 V DC (21–30 V DC)

Power consumption: 0.4 W

Detection angle: 180°

Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height

Installation height: 1–3 m

PIR Sensors: 3 pyro sensors for extensive detection

Sensitivity: Adjustable in 10 steps via ETS

Settings: All settings can be parameterized via ETS3

Illuminance measurement: Light sensor with optical filter and linear output

Illuminance value: Lux Value export via bus

KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol

Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE

Temperature range: -20 to +40 °C

Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)

SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)

SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions

10633
25242 DETECTOR PRESENCIA 300 KNX/KLR IP55, MONTAJE EN PARED (SUPERFICIE), REGULACION CONSTANTE DE LUZ. DETECTORES
11037 25036 Detector presencia 360, montaje empotrado, RA, Ø 30m, REGULACION CONSTANTE DE LUZ. DETECTORES

The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

11037
25036 DETECTOR PRESENCIA 360, MONTAJE EMPOTRADO, RA, Ø 30M, REGULACION CONSTANTE DE LUZ. DETECTORES
11038 25037 Detector presencia 360, montaje empotrado, EA, Ø 30m, REGULACION CONSTANTE DE LUZ. DETECTORES

The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

11038
25037 DETECTOR PRESENCIA 360, MONTAJE EMPOTRADO, EA, Ø 30M, REGULACION CONSTANTE DE LUZ. DETECTORES
11039 25032 Detector presencia 360, montaje empotrado, RA, Ø 16m, REGULACION CONSTANTE DE LUZ. DETECTORES

The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

11039
25032 DETECTOR PRESENCIA 360, MONTAJE EMPOTRADO, RA, Ø 16M, REGULACION CONSTANTE DE LUZ. DETECTORES
11040 25033 Detector presencia 360, montaje empotrado, EA, Ø 16m, REGULACION CONSTANTE DE LUZ. DETECTORES

The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel with parametrisable switch-on delay.
Additionally, alarm systems with parametrisable switch-on delay can be created.

·       1 brightness output in lux (2 Byte)

·       3 pyro detectors
The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of mo­ve­ments and can be activated individually or in groups of two and three.

4 different lenses
The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.

11040
25033 DETECTOR PRESENCIA 360, MONTAJE EMPOTRADO, EA, Ø 16M, REGULACION CONSTANTE DE LUZ. DETECTORES
11041 25010 Detector de movimiento Hokuspokus KNX/KLR, Ø 14 m, REGULACION CONSTANTE DE LUZ. DETECTORES

Presence detector 360° KNX/KLR

Ultra-flat mini KNX presence detector with constant light control

 The presence detector Swiss Garde Hokuspokus KNX/KLR is characterised by the following outstanding features:

 ·       2-channel constant light control

The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.

The two light channels can be controlled via a parametrisable offset
(-50%, synchronous, +50%) using different light values.

·       1 light output for switching, dimming or scenery selection.

·       Standby light

If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby du­ra­tion [min/h]. Two value pairs can be read out from the KNX bus.

·       1 HVAC-channel controls heating, ventilation and air conditioning. This output can be used for presence detection.
Additionally, alarm systems with parametrisable switch-on delay can be created.

 

·       1 brightness output in lux (2 Byte)

·       2 pyro detectors
Two PIR sensors with an elliptic 360° detection area can be activated individually or in pairs.

11041
25010 DETECTOR DE MOVIMIENTO HOKUSPOKUS KNX/KLR, Ø 14 M, REGULACION CONSTANTE DE LUZ. DETECTORES
18633 25075. Swissgarde 360 Presence UP SENSOR PRESENCIA 2 canales DETECTORES
Detección fiable de los movimientos más pequeños en oficinas y salones, versión de 2 canales, para montaje empotrado
18633
25075. SWISSGARDE 360 PRESENCE UP SENSOR PRESENCIA 2 CANALES DETECTORES
10648 25478 Detector de movimiento Hokuspokus DETECTORES
Flacher Präsenzmelder für den Deckeneinbau.
Steht nur 1mm von der Decke ab!
Spart Energie und Stromkosten.

Technische Daten

Nennspannung: 230 Volt/50Hz
Schaltleistung: 2300 W / 10A max. (cos phi = 1)
1150 VA / 5A max. induktiv (cos phi = 0,5)
Zeiteinstellung: Impuls ca.1 sec (20 oder 60 sec Pause),
(Per RC) ca. 10, 30 sec, 1, 2, 6, 10, 20min
Dämmerung: 5, 50, 150, 2000 Lux, oder Speicherung
IR Fernbedienung: Auto / On / OFF (4-6m Reichweite)

Erfassungsbereich: Deckenmontage 360°, Elliptisch
Reichweite: ca. 8m bei Flacher Linsenposition
ca. 12m bei 3mm Linsenhöhe
ca. 16m bei 6mm Linsehöhe
Präsenzfunktion: ca. 4 bis 8m Ø max. sitzend

Dimensionen: 42mm Ø x 49mm (effektiv)
42mm Ø x 2mm bis 8mm (Sichtmass)
Deckenbohrung: 37 bis 38mm

Schutzart: IP 54, Klasse II
10648
25478 DETECTOR DE MOVIMIENTO HOKUSPOKUS DETECTORES
13288 25420 Marco redondeado para montaje de detectores en superfice DETECTORES
Marco redondeado para montaje de detectores en superfice
13288
25420 MARCO REDONDEADO PARA MONTAJE DE DETECTORES EN SUPERFICE DETECTORES
13289 25400 Marco cuadrado para montaje de detectores en superfice DETECTORES
Marco cuadrado para montaje de detectores en superfice
13289
25400 MARCO CUADRADO PARA MONTAJE DE DETECTORES EN SUPERFICE DETECTORES
12529 25273 Caja superficie para detector IP55, blanco DETECTORES

 

12529
25273 CAJA SUPERFICIE PARA DETECTOR IP55, BLANCO DETECTORES
12532 25276 UP 360 IP55 empotrado, blanco DETECTORES

 

12532
25276 UP 360 IP55 EMPOTRADO, BLANCO DETECTORES
12552 25013 UP-Dosen-Kit DA SIN FAMILIA
UP-Dosen-Kit DA
12552
25013 UP-DOSEN-KIT DA SIN FAMILIA
13859 25457 Detector de presencia 16 m DETECTORES
Tension nominale: 230?V?/?50?Hz 
Puissance: 2300?W?/?10?A charge ohmique (cos ? 1,0) 
1150?VA?/?5?A charge inductive (cos ? 0,5) 
ballast électronique simple: 30x 18?W, 25x 36?W ou 20x 58?W max. 
ballast électronique double: 20x (2x 18?W), 15x (2x 36?W) ou 
10x (2x 58?W) max. 
Angle de détection: 360° 
Portée: env. Ø?14?m pour une hauteur de 3?m, max. Ø?6?m présence 
Hauteur de montage: env. 2?6?m 
Réglage crépusculaire: 5?2000?lx 
(ou valeur lux actuelle par télécommande) 
Temporisation: impulsion courte (env. 1?s) ou de 10?s à 20?min environ 
Protection: IP20 montage intérieur, classe II 
Température: -20 à +40?°C 
Dimensions: Ø?105x35?mm (partie visible) 
Certification: TÜV Süd, CE

 

13859
25457 DETECTOR DE PRESENCIA 16 M DETECTORES
15913 25320 Mando a distancia IR. DETECTORES

• Adjustment of all LUX/SENS/Time parameters via P-IR remote control
• Send button for complete parameter transmission in one go
• Memory function for all set parameters

button functions

- sEnD = Ok Transmitting and saving of all set parameters in the
movement detector (Sens, Time, Lux).

-.On/OFF Switch the light either on or off for 6 hours. Subsequently
the unit will switch back to “Auto” mode.

- auTO Automatic function in accordance with settings for the movement
detector.

-TEsT The movement detector test is independent of the ambient
light value.

Impulse pause Select the duration of the pause between 2 pulses with the impulse-pause button:

20 or 60 s for optimised control of stairwell lighting systems.

lux value read-in function Saving of the current prevailing ambient brightness value as a switch-on threshold.

15913
25320 MANDO A DISTANCIA IR. DETECTORES
16553 27360 HF sensor 360 Eb, detector microondas. DETECTORES
Your advantages
• For improved detection, even in obstructed spaces
• Sensitive movement detection at frontal approach
• The HF sensor also reacts well with high temperatures
• Detects smallest movements even without free line of sight of the moving persons
• Suitable for hidden installation (with wood, open metal etc.)
• Timer, light and range controller
• Ideal for invisible integration in lights or behind trim
• Zero-crossing switching for relay protection
16553
27360 HF SENSOR 360 EB, DETECTOR MICROONDAS. DETECTORES
17306 3220 Infra Garde 180 UP, detector pared DETECTORES
Preisgünstiger UP-Wandmelder
mit Handschalter Ein/Aus/Automatik
Tolerant bei der Detektion von Kleintieren

Nennspannung: 230 V / 50 Hz
Schaltleistung: 1000 W / 5 A (cos f 1,0)
250 VA / 1,25 A (cos f 0,5)
Erfassungsbereich: 180 Grad
Reichweite: ca. 8 m frontal und ca. 4 m seitlich
Montagehöhe: ca. 1- 1,5 m
17306
3220 INFRA GARDE 180 UP, DETECTOR PARED DETECTORES
18587 25270AP IP55 caja de montaje en superficie, blanco SIN FAMILIA

IP55 caja de montaje en superficie, blanco

Specification

  • Mounting: Surface mount
  • Weight: 0.13 kg
  • Colour: Black, Grey, White
18587
25270AP IP55 CAJA DE MONTAJE EN SUPERFICIE, BLANCO SIN FAMILIA
18691 25270UP Frontal IP55 para detectores de presencia/movimiento Swiss Garde 300 SENSORES
 
18691
25270UP FRONTAL IP55 PARA DETECTORES DE PRESENCIA/MOVIMIENTO SWISS GARDE 300 SENSORES


CATÁLOGOS ESPECIALES KNX
Estética Pulsadores 360º
Pulsadores
Smart Metering
Catálogo MDT 2017
Simulador Iddero Verso

APRENDE
Webinars gratuitos
Tutoriales uBrick
Video Tutoriales CBSE


PARTICIPA
Trivial µBrick
Trucos y consejos KNX
PRUEBA
Test gratutito visualización CBSE

ÚLTIMAS NOTICIAS KNX
Todas las noticias

ÚLTIMAS OFERTAS KNX
Todas las ofertas
DESCARGAS
KNX - Todas las marcas

FUTURASMUS KNX GROUP
Contacto
Dónde estamos
Futurasmus en el mundo
SÍGUENOS
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

CENTRO DE FORMACIÓN KNX++
Futurasmus Zentrum

KNX TEST LAB CERTIFICADO
Futurasmus KNX Lab
MAYORISTA KNX ESPECIALIZADO CENTRO DE FORMACIÓN CERTIFICADO KNX
Futurasmus KNX Group es un mayorista KNX altamente especializado y activo a nivel internacional, siendo nuestro punto fuerte el excelente soporte técnico que ofrecemos. Puede visitar nuestro catálogo online en esta web, y si es un profesional del sector, pedir presupuesto sin compromiso para sus proyectos KNX. Si está interesado en comprar componentes KNX, le invitamos a leer nuestras Condiciones Generales de Venta y ponerse en contacto con nuestros agentes comerciales y técnicos por teléfono, e-mail o chat on-line. Desde 2003 somos Centro de Formación Certificado KNX++, que significa que estamos autorizados para impartir el Curso Básico KNX así como el Curso Avanzado KNX y el Curso de Tutor KNX. Somos independientes de fabricantes y también ofrecemos otros seminarios KNX especializados y monográficos. Tras haber formado a más de 1.500 KNX Partners, nuestros KNX Trainers tienen una amplia y positiva experiencia. Por favor, contacte con nosotros para cursos KNX personalizados (grupos de al menos 8 personas) en cualquier lugar del mundo (español, inglés y alemán).
USO DE COOKIES
Utilizamos cookies propias y de terceros, analizando sus hábitos de navegación en nuestra página web, con la finalidad de garantizar la calidad, seguridad y mejora de los servicios ofrecidos a través de la misma. En los casos en que el usuario no manifieste expresamente si acepta o no la instalación de las cookies, pero continúe utilizando nuestra página web, se entenderá que éste ha dado su consentimiento, informándole expresamente de la posibilidad de bloquear o eliminar las cookies instaladas en su equipo mediante la configuración de las opciones del navegador. Puede obtener más información a este respecto consultando nuestra “Política de Cookies”.